What Is the Best pH For Drinking Water?
How can you be sure that the water you are drinking is healthy for you? The pH of drinking water is an important factor in determining its suitability for consumption, and it can even affect the taste of your drinking water with impurities or pollutants. Here is what you need to know about the best pH for drinking water:
What does pH stand for in water?
The abbreviation pH stands for potential hydrogen, and it tells us how much hydrogen is in liquids and how active the hydrogen ion is. It is a measure of the acidity or alkalinity of a solution on a scale from 0 to 14. A pH of 7 is neutral, while numbers below 7 are acidic and numbers above 7 are alkaline.
What are the pH levels in water?
Depending on the source of the water, naturally occurring pH levels can range widely. For example, surface waters like rivers and lakes typically have a pH close to neutral (7), while groundwater may be very acidic (at or below 4.5) due to organic acids and carbon dioxide in the soil. Municipal tap water is usually treated with alkaline chemicals to bring it within an acceptable range for drinking, typically between 6.5 and 8.5 on the pH scale.
Rainwater also has a naturally low pH of about 5.6. Bottled water often has a higher pH than tap water due to the addition of minerals like calcium and magnesium, which can raise the pH level. It is important to check the label of any bottled water that you purchase for its exact pH reading. While most people prefer drinking water with a neutral or slightly alkaline pH, it is important to remember that water with a high pH may not be safe to drink.
The Best Bottled Water pH
The best pH for drinking water is between 6.5 and 8.5 on the pH scale. This range is optimal for drinking water safety and taste. If your bottled water has a pH lower than 6.5, it may be too acidic and corrode pipes or leach metals into the water. On the other hand, if the pH is higher than 8.5, it will taste bitter and may not be safe to drink as it could affect mineral absorption in your body.
The U.S. Environmental Protection Agency (EPA) sets a maximum allowable pH level in drinking water at 8.5 to reduce corrosion and ensure proper drinking water treatment. It is important to note that the pH of a person's drinking water is highly dependent on where they live and can vary greatly from area to area.
For those who prefer to drink alkaline bottled water, it is important to check the label to make sure that the pH of the water is within the acceptable 6.5 and 8.5 range. This will ensure that your drinking water is both safe and pleasant tasting. It is important to remember that pH levels in bottled water can vary greatly from brand to brand, so it is always best to check the label first!
How does water pH affect your teeth?
The pH of your drinking water can affect the condition of your teeth. Drinking water with a low pH (below 6.5) increases the risk of enamel erosion and dry mouth, which can lead to cavities, gum disease, and other dental problems. On the other hand, drinking water with a high pH (above 8.5) can cause tooth discoloration, as minerals in the water deposit on enamel.
It is important to drink only water with a pH between 6.5 and 8.5 to protect your teeth and ensure that you are getting the optimal benefits from drinking water. In fact, some of the most popular drinking water brands have pH values less than 6.0, putting your oral health at risk.
Xeni Water’s Best-Tasting Bottled Water
At Xeni Water, we have crafted the perfect pH to create the best-tasting bottled water. Our water has a perfect pH balance of 7.4(+/-0.05)! This means it is slightly alkaline – perfect for giving you the smoothest and freshest water possible and making it one of the best pH levels for drinking water on the market today. XENI Waters contain electrolytes and minerals to support a healthy lifestyle and boost hydration. XENI Water gives you the perfect blend of taste and health benefits, ensuring your drinking water experience is top-notch. Place your first order today!
